Niagara 3000 Delivers Power, Protection, Performance
Power management is a hot topic in audio. Niagara 3000 loves the attention.
Loading...
Yukon XLR > XLR
Analog Audio Interconnect Cable
$510.00 USD
Unit price
/
Unavailable
SKU:
YUKON0.5X
Amplifier-End Connector: Multi-Spade, Banana, U-Spade, or V-Spade
Often, the choice between terminating your speaker cables with spade lugs or banana plugs will come down to personal preference. However, the EU-compliant isolated binding posts used on some power amplifiers often makes it difficult if not impossible to tighten spade lugs with high torque or pressure. In these applications, the AudioQuest banana connector is the superior choice, and may be the only choice.
AudioQuest has conducted a fairly extensive survey of contemporary amplifier manufacturers to determine whether spades or bananas will be most appropriate for a given brand and model of amplifier. Please contact us, provide the brand and model of the amplifier, and we’ll respond with the optimal connector type.
Given the girth and weight of our Mythical Creature Series speaker cables, a spade may be better capable of fully supporting the cable. This is particularly a concern with binding posts that do not allow a banana connector to fully seat into the post. The EU-compliant posts will neither accept our V-Spade nor allow our Multi-Spade to be fully seated. For these applications (or when you’re not certain), we highly recommend the U-Spade, as it can accommodate any binding post. The V-Spade is a specialty spade connector that works well with large wingnut binding posts (such as the Mundorf ), as it allows extra clearance.
Speaker-End Connector: Spade or Banana
Here we typically recommend the U-Spade or banana connector. However, even though there is less weight and pressure on this side of the cable (particularly for BiWire sets), it is nevertheless important to note the binding post’s design. If a banana connector cannot seat all the way into the binding post, we recommend one of our spade connectors.
Key Features & Technology Explained
Specifications
Specifications
Description
Description
Solid Perfect-Surface Copper+ (PSC+) Conductors
Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation.
Carbon-Based 3-Layer Noise-Dissipation
It's easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipment's ground reference requires AQ's Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical "reference" ground plane, which in turn causes a distortion of the signal. NDS's alternating layers of metal and carbon-loaded synthetics "shield the shield," absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Direction-Controlled Conductors
All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance. A fundamental aspect of AudioQuest's multifaceted Noise-Dissipation technology, Direction-Controlled Conductors ensure induced noise is dissipated and drained properly.
Polyethylene Air-Tube Insulation
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials.
Triple-Balanced Geometry
Our Triple-Balanced Geometry uses a separate ground-reference conductor, so the cable's shield is never used as an inferior conductor. Whether prepared with RCA or XLR plugs, the cable's three conductors ensure that the positive and negative signals have equally superior, low-distortion conducting paths.
Cold-Welded, Hanging-Silver Directly Over Pure Purple Copper Terminations
| Technical Specifications | |
|---|---|
Cable Configuration |
2 Single Cables - 1 x Female XLR > 1 x Male XLR
|
Metal |
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
Noise Dissipation |
Carbon Mesh-Network
|
Geometry |
Triple-Balanced
|
Insulation |
|
Terminations |
|
Signal Type |
|
Cable Length |
0.5 m = 1 ft 7 in
|
Jacket |
Black on Dark Gray Braid
|
| Weights & Dimensions | |
Sold As |
|
 Yukon XLR > XLRFrom $255.00 View details |  Mackenzie XLR > XLRFrom $184.98 View details |  Black Beauty XLR > XLRFrom $437.50 View details |  Pegasus XLR > XLRFrom $877.50 View details | |
|---|---|---|---|---|
Cable Configuration |
2 Single Cables - 1 x Female XLR > 1 x Male XLR
|
2 Single Cables - 1 x Female XLR > 1 x Male XLR
|
1 Single Cable - 1 x 5 Pin DIN > 1 x 5 Pin DIN Cable
|
2 Single Cables - 1 x Female XLR > 1 x Male XLR
|
Metal |
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
ZERO: Solid Perfect-Surface Copper+ (PSC+) / BASS: Solid Perfect-Surface Copper+ (PSC+)
|
Noise Dissipation |
Carbon Mesh-Network
|
Carbon Mesh-Network
|
Graphene/Carbon Mesh-Network
|
Graphene/Carbon Mesh-Network + Double 72v DBS
|
Geometry |
Triple-Balanced
|
Triple-Balanced
|
ZERO-Tech
|
ZERO-Tech
|
Insulation |
|
|
|
|
Terminations |
|
|
|
|
Signal Type |
|
|
|
|
Sold As |
|
|
|
|
News & Reviews
-
-
PowerQuest Delivers
Alberto Pittaluga dives deep into the benefits of power conditioning, explores the relatively modest PowerQuest 3, and decides it’s staying in his system.
-
On a Power Quest
Phil Wright goes on a power quest and arrives at Niagara.
-
Zen Widow Delivers Sonic Thrills
Originally published in the April issue of The Absolute Sound, Derk Richardson's excellent review of Zen Widow's latest release, IV: (from one dark age to another), is now available online.
-
Icons of Audio: Bill Low
AudioQuest’s founder and chief designer, William E. Low, is the featured guest in the premier episode of Stereophile’s YouTube series, “Icons of Audio.”
-
Niagara 1200 Saves the Day
Artur Evers of Like HiFi puts Niagara 1200 through its paces and, indeed, he likes.
-
Why HDMI Cables Are Important
In this video, Walts TV hosts a discussion with Angelo, a Field Educator responsible for product training at AudioQuest. We delve into viewer comments from previous AudioQuest videos, exploring the intricacies of...
-
20 AudioQuest Products Named TAS Editors' Choice
We are delighted to announce that 20 AQ products — across a wide range of categories, all representing outstanding performance and value — have received TAS’s 2024 Editors’ Choice Award.
