Tornado High (Variable) Current

Power Cable

Optimized for use with High/Variable-Current components, Hurricane High-Current AC cable features Perfect-Surface Copper+ (PSC+) conductors, 6% Silver drains, 72v Dielectric-Bias System, ZERO-Tech for uncompressed current transfer, and RF/ND-Tech to cancel induced RF noise.

$1,545.00 USD
SKU: NRGTORNUS01  |  Streepjescode: 092592002333

This product is made to order at AudioQuest headquarters in Irvine, CA. Expect moderately delayed fulfillment times. Custom lengths are available. Contact your Authorized AudioQuest Dealer for more information.

Key Features & Technology Explained

  • Solid conductors prevent strand-interaction, a major source of dynamic distortion in cables.

  • AudioQuest's best copper. To the greatest extent presently possible, extreme-purity Perfect-Surface Copper+ (PSC+) conductors minimize distortion caused by grain boundaries.

  • ZERO-Tech eliminates the electrostatic field between the cable’s high and low signal conductors, enabling linear Radio Frequency (RF) Noise-Dissipation, and uncompressed transients.

  • RF/ND-Tech minimizes circuit misbehavior by cancelling induced RF noise.

  • 72v Dielectric-Bias System (DBS) saturates and polarizes insulation, allowing clear, dynamic sound against a quiet “black” background.

  • 6% Silver-Plating is applied to the high-quality copper base metal to improve Noise-Dissipation.

  • All conductors controlled for RF-noise directionality.

Specificaties

Beschrijving

    High (Variable) Current Cables
    Optimized for use with AC power conditioners/regenerators, power amplifiers, and any components that contain a built-in power amplifier, including AV receivers, powered speakers, and powered subwoofers.

    Perfect-Surface Copper (PSC) and Perfect-Surface Copper+ (PSC+) Conductors
    A carefully finessed combination of solid high-purity Perfect-Surface Copper (PSC) and extreme high-purity Perfect-Surface Copper + (PSC+) conductors to prevent strand interaction, a major source of ear fatiguing transient intermodulation distortion. The astonishingly smooth and pure Perfect-Surface Copper eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

    ZERO-Tech
    With current capacity of 20 amps RMS @ 125VAC 50/60Hz (16 amps RMS @ 220-240VA 50/60Hz), Tornado/High (Variable) Current can withstand current transient peaks many times its continuous (average) RMS rating. This makes Tornado/High (Variable) Current ideally suited for a wide assortment of AC power conditioners, power regenerators, AC isolation transformers, and AC battery back-up devices, as well as any power amplifier, powered subwoofer, powered loudspeaker, powered receiver, or integrated amplifier.

    RF/ND-Tech
    AC Ground wires may provide protection from an electrical short circuit, but they also act as an antenna. Thus, they are subject to induced radio-frequency (RF) noise. This RF noise bypasses component power supplies and is typically coupled directly into a system’s most sensitive audio/video circuits. AudioQuest’s RF/ND-Tech greatly reduces this distortion, yielding unprecedented levels of noise dissipation across the widest bandwidth (range) of radio frequencies possible. Our unique circuit topology uses a common-mode phase-cancelling array, in concert with proprietary dielectric materials which provide additional differential linear filtering. US Patent # 8,988,168.

    72v Dielectric-Bias System (DBS)
    Insulation is also a dielectric that can act like a shunt-filter. Biasing minimizes dielectric-noise and linearizes the filter, significantly improving wide-bandwidth dissipation of induced RF noise.

    Directionality
    All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance.

AudioQuest Tornado High (Variable) Current - NRGTORNUS01 1 m = 3 ft 3 in IEC-C13 (15 Amp)
AudioQuest

Tornado High (Variable) Current

$1,545.00 USD

Noise Dissipation

-

A/V Conductor

-

eARC Conductor

-

Ground Reference

-

-

Geometry

-

Gauge

11 AWG Line and Neutral / 12 AWG Ground

Metal

Solid Perfect-Surface Copper+ (PSC+)

Pair or Single

-

Series

Storm, Tornado

Speaker-End Connector

-

Amplifier-End Connector

-

-

-

-

Output

-

DAC Chip

-

Volume Control

-

Desktop Compatibility

-

Mobile Compatibility

-

Application Options

-

-

Included Adaptor

-

Dimensions

-

Cable Length

  • 1 m = 3 ft 3 in
  • 2 m = 6 ft 6 in
  • 3 m = 9 ft 10 in

Plug

  • IEC-C13 (15 Amp)
  • IEC-C19 (20 Amp)
Product weergeven